Real heat rejection,
entry price.
A ceramic hybrid built to run low-reflection. 78.5% infrared rejection and a Pure Black finish, at the bottom of the ZV range.
Where the ZV range starts
ZV70 is a ceramic hybrid tuned for a low-reflection finish. It is a long way past basic dyed tint on heat, and it is the cheapest way into the ZV line.
Infrared rejection — the heat you actually feel
Total solar energy rejected, the best single number for heat
UV rejection, protecting skin and interior trim
Accelerated weathering test behind the colour warranty
What you actually get
Well past basic tint
78.5% infrared rejection and 59.9% total solar energy rejection. Dyed film sold on price typically manages a fraction of that and fades within a few years.
The lowest reflectance we make
Exterior reflectance runs 5.1% to 6.3%, the flattest finish in the range. Pure Black keeps the glass and the window frame reading as one line.
Same warranty as the flagship
Lifetime cover against bubbling, peeling, cracking and colour change — the entry tier is not a lesser warranty.
Every ZV70 shade, measured
Five shades. Infrared rejection holds between 76.3% and 78.5% across almost the whole range, so a lighter choice costs you very little heat performance.
| Product | Colour | VLT | IRR | UVR | TSER | VLR int / ext | SC | SHGC |
|---|---|---|---|---|---|---|---|---|
| ZV70-05 | Pure Black | 6.3% | 78.5% | 99.9% | 59.9% | 5.4% / 5.6% | 0.45 | 0.40 |
| ZV70-15 | Pure Black | 14.9% | 77.9% | 99.9% | 55.2% | 5.0% / 5.1% | 0.51 | 0.45 |
| ZV70-25 | Pure Black | 26.4% | 76.3% | 99.9% | 52.6% | 5.1% / 5.9% | 0.54 | 0.47 |
| ZV70-35 | Pure Black | 29.7% | 76.8% | 99.9% | 51.0% | 5.3% / 6.3% | 0.56 | 0.49 |
| ZV70-50 | Pure Black | 56.8% | 77.7% | 99.9% | 43.8% | 5.4% / 6.0% | 0.65 | 0.56 |
Swipe the table sideways to see every column.
VLT visible light transmission — how much light gets through; lower is darker · IRR infrared rejection — the heat you feel · UVR UV rejection — what fades trim and damages skin · TSER total solar energy rejection — all the sun's heat, the best single number · VLR int / ext visible light reflectance, inside face / outside face — high ext looks like a mirror · SC shading coefficient — solar heat let through compared with plain glass; lower is better · SHGC solar heat gain coefficient — the share of solar heat that gets through the glass; lower is better. Which VLT is legal in NZ →
Front side windows must keep 35% total light transmission once the film is on, and your factory glass counts toward that. What the numbers mean and what is legal here →
Every shade in the table comes in this film. See every shade on the car →
How pricing works
Three things set the price of a ZV70 job — and none of them is a number we can guess from here.
Glass count
How many windows are being filmed — two fronts only, or the whole car including the rear screen.
Glass shape
How curved the glass is, and how much preparation it needs before the film goes on.
Film amount
More glass means more film — a van or wagon takes more than a hatch.
Send your plate or a photo and the branch gives you a same-day price, usually without seeing the car. No deposit, and nothing is booked until you say so.
ZV70 questions we get
Is ZV70 just cheap tint?
No. Cheap tint is usually dyed film, which fades to purple and does little for heat. ZV70 is a ceramic hybrid rejecting 78.5% of infrared, and it carries the same lifetime warranty as ZV90.
How much better is ZV80?
About 9 points of infrared rejection. If the car sits in the sun all day, the step up is usually worth it; for a garaged second car, ZV70 is the sensible pick. Your branch can quote both tiers together so you can compare.
Will it fade?
It should not. The lifetime warranty covers colour change, and every ZV shade is tested to 2,000 hours of accelerated weathering before it ships.
How long does the install take?
Two to three hours for a standard sedan. Leave the windows up for two to three days afterwards while the film cures — slight haze or small water pockets during that time are normal and clear on their own.