Our coolest film —
96.7% infrared, no metal.
Pure nano-ceramic, 96.7% infrared rejection, and the only tier in the range with no metal layer at all.
Our highest heat rejection
ZV90 is pure nano-ceramic — the top of the Zivent range, and the only tier built with no metal layer.
Infrared rejection — the heat you actually feel
Total solar energy rejected, the best single number for heat
UV rejection, protecting skin and interior trim
Accelerated weathering test behind the colour warranty
What you are paying more for
No metal layer
ZV90 carries no metal at all, so it cannot interfere with GPS, toll tags or tyre-pressure sensors. It is the only fully metal-free tier we make.
Dark without the silver cast
Exterior reflectance stays between 4.7% and 7.1% across every shade, so the glass reads deep black.
Holds its colour
2,000 hours of QUV testing sits behind the lifetime warranty against purpling and fade.
Every ZV90 shade, measured
Pick the shade by how dark you want it. Heat rejection barely moves across the range — even the lightest ZV90 rejects more infrared than most films do at their darkest.
| Product | Colour | VLT | IRR | UVR | TSER | VLR int / ext | SC | SHGC |
|---|---|---|---|---|---|---|---|---|
| ZV90-05 | Onyx Black | 5.0% | 96.7% | 99.9% | 71.7% | 4.7% / 5.0% | 0.41 | 0.36 |
| ZV90-15 | Onyx Black | 15.0% | 94.7% | 99.9% | 62.0% | 5.0% / 5.7% | 0.44 | 0.38 |
| ZV90-25 | Onyx Black | 26.2% | 93.8% | 99.9% | 59.6% | 5.1% / 5.9% | 0.47 | 0.40 |
| ZV90-35 | Onyx Black | 29.1% | 94.7% | 99.9% | 58.3% | 5.2% / 6.2% | 0.48 | 0.42 |
| ZV90-40 | Onyx Black | 39.2% | 94.8% | 99.9% | 55.3% | 6.0% / 6.1% | 0.52 | 0.45 |
| ZV90-50 | Onyx Black | 49.3% | 95.5% | 99.9% | 53.2% | 6.5% / 7.1% | 0.56 | 0.47 |
Swipe the table sideways to see every column.
VLT visible light transmission — how much light gets through; lower is darker · IRR infrared rejection — the heat you feel · UVR UV rejection — what fades trim and damages skin · TSER total solar energy rejection — all the sun's heat, the best single number · VLR int / ext visible light reflectance, inside face / outside face — high ext looks like a mirror · SC shading coefficient — solar heat let through compared with plain glass; lower is better · SHGC solar heat gain coefficient — the share of solar heat that gets through the glass; lower is better. Which VLT is legal in NZ →
Front side windows must keep 35% total light transmission once the film is on, and your factory glass counts toward that. What the numbers mean and what is legal here →
Every shade in the table comes in this film. See every shade on the car →
How pricing works
Three things set the price of a ZV90 job — and none of them is a number we can guess from here.
Glass count
How many windows are being filmed — two fronts only, or the whole car including the rear screen.
Glass shape
How curved the glass is, and how much preparation it needs before the film goes on.
Film amount
More glass means more film — a van or wagon takes more than a hatch.
Send your plate or a photo and the branch gives you a same-day price, usually without seeing the car. No deposit, and nothing is booked until you say so.
ZV90 questions we get
Is ZV90 worth it over ZV80?
About 9 points of infrared rejection — 96.7% against 87.2% — and ZV90 is fully metal-free. You notice the heat difference most in stop-start traffic on a hot afternoon. If the car lives in a garage and does short trips, ZV80 is honestly enough.
Will it look too reflective?
No. Exterior reflectance sits under 7.1% across every shade, so the glass reads as deep black rather than silver.
Does it affect GPS or the tyre sensors?
No. ZV90 is fully metal-free, so it does not attenuate radio signals. Phone reception, GPS, toll tags and tyre-pressure sensors all work normally.
How long does the install take?
Two to three hours for a standard sedan. Leave the windows up for two to three days afterwards while the film cures — slight haze or small water pockets during that time are normal and clear on their own.